<code id='17fuqi17wu'></code><style id='17fuqi17wu'></style>
    • <acronym id='17fuqi17wu'></acronym>
      <center id='17fuqi17wu'><center id='17fuqi17wu'><tfoot id='17fuqi17wu'></tfoot></center><abbr id='17fuqi17wu'><dir id='17fuqi17wu'><tfoot id='17fuqi17wu'></tfoot><noframes id='17fuqi17wu'>

    • <optgroup id='17fuqi17wu'><strike id='17fuqi17wu'><sup id='17fuqi17wu'></sup></strike><code id='17fuqi17wu'></code></optgroup>
        1. <b id='17fuqi17wu'><label id='17fuqi17wu'><select id='17fuqi17wu'><dt id='17fuqi17wu'><span id='17fuqi17wu'></span></dt></select></label></b><u id='17fuqi17wu'></u>
          <i id='17fuqi17wu'><strike id='17fuqi17wu'><tt id='17fuqi17wu'><pre id='17fuqi17wu'></pre></tt></strike></i>

          撕开美女的衣服,撕衣服,可脱身服全去掉的游戏真人版,美女脱18以下禁止看禁止观看软件
          泡沫机械设备咨询热线:13805922238/15905057228
          泡沫机械设备 泡沫机械设备
          泡沫机械 EPS成型机
          首页 > 服务中心 > EPS建厂方案EPS建厂方案
          Plant Layout 建厂方案
          Technical Consultancy & Evaluation
          技术支持和评估
          目录:
          ? ?EPS Plant Layout and Basic data
          ? ? ?EPS泡沫厂布局和基本数据
          ???Complete EPS plant Reference Photos
          ? ? ?完整的泡沫厂参考图片
          ???Machine Set Up
          ? ? 机器安装
          ? ?New Plant Survey?
          ? ? 新建厂调查

          一、 EPS泡沫厂布局和基本数据
          EPS泡沫厂基本数据
          EPS泡沫厂规划 机台數目m/cs 機台种別 成型面積 周 期 成型容積 / 立方米
                     
          ? 8 Daisen 500C 3.84 62 2.4
            0 FK810 EPS 0 0 0
            3 FK813 EPS 3.12 60 1.92
            0 FK1014 EPS 0 0 0
            0 FK1018 EPS 0 0 0
            0 FK1318 EPS 0 0 0
            3 FK1214 EPS 5.1 60 3.42
            2 Prefoamer 0 0 0
          Total amount machines : 机台總數目 16 Amount 12.06 52 7.74
          Total foam area As/m2 總成型面積 12.06 table 1: simultaneity factor    
          cycle time tz/s 周期/秒 60 number M/C w    
          cycles nz/h 總周期/小時 60 2 0.8    
          Simultaneity factor w acc. table 1 同步參數 0.5 4 0.75    
              6 0.7    
              8 0.65    
          Steam installation 蒸氣周邊   10 0.6    
              11 0.5    
          recommended flow rate up to 50 m length: cd in m/sec 25    
          special steam requirement mdspec. in kg/(m2z) 5.6        
          steaming time td in sec 10        
          limiting of peak demand ms in kg/sec 3.38        
          density pd9 of saturated steam with 9,0 bar 5.15      

          density pd4 of saturated steam with 4,0 bar 2.67        
          density pd3 of saturated steam with 3,0 bar 2.16        
          volume flow Vsd in m3/s 1.56      

          Steam boiler蒸氣鍋爐        
          steam requirement md of FTA in kg/h 蒸氣需求量 4052        
          supply of boiler mft with 5% lossess in kg/h 蒸氣鍋爐供應量 4256      

          Steam accumulator 蒸氣儲能罐容積        
          when decreasing the pressure in the accumulator from 4 to 3 bar        
          20 kg steam/m3 water are released, require accumulation volume 3      

          Steam reducing valve 蒸氣減壓閥   table 2: steam reducing valve   ? ?     ? ?
          steam consumption mft in kg/h 4265 nom. width DN kvs-value    
          pressure proportion before and after red. valve p2/p1:4/9 bar 0.44    
          z-value 91 15 3.2    
          m-value 1 20 5    
          kv-value 47 25 8    
          kvs-value 59 32 12.5    
          steam reducing valve acc. table 2: nominal width 減壓閥口徑 80 40 20    
          50 32    
              65 50    
          Steam leads:蒸氣管道   80 80    
          between D-boiler and D-red. valve in mm 108 100 125    
          between D-red. valve and D- accumulator in mm 150 125 190    
          lead between D-accumulator and moulding machine in mm 282 150 280    
          or a ring lead in mm 199 200 420    
          250 500    

          Air installation 壓縮空氣周邊
          High pressure network with 7 bar高壓壓縮空氣網絡7巴          
          amount of machines for control air 16      
          number of fillers (17 fillers per m2 moulding area) 205      
          air consumption in l/sec per filler 7      
          filling time in sec. 10      
          air requirement 7bar in m3/h 高壓風每小時需求量 1149      
          Supply of the compressor in m3/min壓縮風机每分鐘供應量          
          with 5% losses 20      
          filling time /sec. 10      
          limiting of peak demand m3/sec. 0.718      
          pressure of lead / bar 6      
          lead diameter / mm 管道口徑 98      
          as ring lead / mm 69      
          loading pressure of the air receiver / bar 7      
          unloading pressure of the air receiver / bar 6      
          volume of the air receiver / m3 壓縮風缸容量/立方米 4      

          High pressure network with 7 bar高壓壓縮空氣網絡7巴          
          amount of machines for control air 16      
          number of fillers (17 fillers per m2 moulding area) 205      
          air consumption in l/sec per filler 7      
          filling time in sec. 10      
          air requirement 7bar in m3/h 高壓風每小時需求量 1149      
          Supply of the compressor in m3/min壓縮風机每分鐘供應量          
          with 5% losses 20      
          filling time /sec. 10      
          limiting of peak demand m3/sec. 0.718      
          pressure of lead / bar 6      
          lead diameter / mm 管道口徑 98      
          as ring lead / mm 69      
          loading pressure of the air receiver / bar 7      
          unloading pressure of the air receiver / bar 6      
          volume of the air receiver / m3 壓縮風缸容量/立方米 4      

          Calculation of the reduction of energy能耗減省之計算        
          Single Plant單一高壓網絡
          single plant with supply / m3/min 每分鐘需求量 42
          power of the plant in kW with 7 bar 292
          lead diameter / mm 管道口徑 240
          volume of the air receiver / m3 壓縮風缸容量/立方米 12
          Double plant高低壓網絡
          power of the plant in kW with 7 bar 141
          power of the plant in kW with 4 bar 106
          amount of power / kW 247
          Difference / KW 45
          current costs / RMB/kwh 1.2
          annual production hours 4,800
          annual reduction /RMB 每年可減省 261,044

          Water installation 冷水周邊
          Mould cooling with 50 o C 模具冷水50度          
          cooling time per cycle WZK / s. 8        
          hot water requirement (WZK) / m3/h 冷卻模具高溫水需求量 50.65        
          limiting of peak demand / m3/s 0.053        
          hot water lead as stub cable / mm 管道口徑 150        
          as ring lead / mm 106        
          number of pumps 2        
          average flow rate between 3 and 4 bar / m3/h 20        
          volume of water tank / m3 儲水缸之容積 1.0        
          Condenser cooling with 25 0 C 冷凝水25度          
          cooling time KK /s 12        
          average consumption / m2 foam area and cycle 0.055        
          number of vacuum pumps 12        
          requirement of cold water (KK) / m3/h 冷凝水需求量 45.20        
          limiting of peak demand / m3/s 0.029        
          cold water lead as stub cable / mm 管道口徑 111        
          as ring lead / mm 79        
          number of pumps 2        
          average flow rate between 3 and 4 bar / m3/h 20        
          volume of water tank / m3 儲水缸之容積 0.6        

          Single Plant單一網絡          
          single plant with supply / m3/h 每小時需求量 95.9        
          lead diameter / mm 管道口徑 183        
          volume of the water tank / m3 儲水缸之容積 2.0        
          Power of cooling tower: 冷水塔之能量          
          hot water requirement (WZK) / m3/h 冷卻模具高溫水需求量 51        
          cold water requirement (KK) / m3/h 冷凝水需求量 45        
          amount of heat to be drawn off: /kcal/h 1,355,940        
          : /KJ/h 5,677,050        
          Condensate lead:冷凝水回收管道          
          nominal width: /mm 管道口徑 273.7        

          总共5页   [首页]   [上一页]  1 2 3 4 5  [下一页]   [尾页]
          闽ICP备17022499号-1   泡沫机械_泡塑机械_苯板设备_EPS成型机_泡沫箱设备_EPP成型机_EPS建筑??樯璞竉ETPU成型机(爆米花鞋底设备)-翡柯机械(福建)有限公司-全球泡沫机械专家   
          友情链接
          撕开美女的衣服,撕衣服,可脱身服全去掉的游戏真人版,美女脱18以下禁止看禁止观看软件 百度 360 搜狗 好搜

          警告:本站明確包含ALDULT内容,未滿18嵗游客禁止觀看!收藏本站:請使用Ctrl+D進行收藏